Back to product list
Timber grabs

Albach Tilt-Grapple Saw

The tilt-grapple saw TFZ 90 360° has been developed by Albach partner company, Bachmaier Landtechnik.

The endless rotating felling tong is a further development and thus the felling tong of the third generation. Designed for the Sennebogen 718 handling excavator, the tongs are capable of handling log diameters of up to 700 millimeters. The blade length is 900 mm. The max. grab opening is 1870 mm, the minimum log diameter should not be less than 110 mm.

Specifications

Saw
Saw motor 19 ccm (optional 25 ccm)
Chain type 0.404” (optional 3/4”)
Blade lenght 90 cm
Cutting diameter max. 70 cm
Chain tensioning hydraulic
Chain lubrication grease; lubrication proportional to log diameter
Recommended lubricant Kajo-BIO-Chain Grease
Grapple
Gripper opening max. 160 cm
Trunk diameter min. 10 cm
Tilt swivel 195°
Tilt operation 360° endless
Safety To ensure safe operation, all functions (grapple closing, turning, tilting) are equipped with load holding valves so that the load can be brought to the ground in a controlled manner even in the event of a hose rupture. In addition, the valves protect the installed components from overloads to ensure long and maintenance-free operation.

Related products

HV Hydraulic winch

Hydraulic pulling power for all needs

KPL High pressure street washing unit

Deep clean surfaces quickly, simply and low water consumption.

HPT Hydraulic power units

Hydraulic Power for All Use, Anywhere

Bale Grab Type SmGR

Grab for RDF ball handling